Manual Tea Bag Packing Machine Tea Packing Machine for Small Business 7-14 G

Description

Manual Tea Bag Packing Machine Tea Packing Machine for Small Business 7-14 G
Product Description:
Our packaging machine can package 7-14 grams. Each bubble as needed (package), weight,
density reference tea, using addition and
subtraction on the feed plate gasket to adjust to the desired weight,
not added to each well pads original weight about 7 grams, pad
thickness 2 MM gasket is about to increase 0.5 g,
pad thickness shim about 4 MM increased 1.0 g, pad shim thickness 8 MM increased
about 2.0 grams, and then screw the plate is fixed, while paying attention to the use of screws to adjust feeding plate balance.
Size:
35*29*20
Weight:
2.4 kg
Procedure:
1. Flip the middle shelf on the desktop
.
2. The small bubble bag full, neatly set out spout.
3. Flip the base plate to the bottom of the tea bag
.
4.
T
he bottom and middle shelves put positive
.
5.
Put the upper feed plate, and fasten
.
6. According to customer required per bulb (pack) weight,
the reference density of tea,
using subtraction adjustment shim plate
board for feeding to the desired
weight,
not added to each well pads original weight about 7 grams,
pad thickness 2 MM gasket
is about to increase 0.5 g,
pad thickness shim about 4 MM increased
1.0 g, 8 MM spacer pad thickness increased about 2.0 grams,
and then board the middle two screws fixing
the plate, while paying attention to the use of screws
adjusting the balance of the feed plate.
7. Loading amount of tea down on the feed plate,
so that each cell evenly into the tea leaves,
tea excess sweep out from the side
of the mouth, and then the upper
plate out of the drawing board, tea vacuum bag to enter the following
.